How To Replace A Roll Up Garage Doors Springs08/12/2013 Back To Blog
Among the different garage door opener makes, roll up door openers are popular because they are convenient to operate, and require less maintenance. However, roll up garage doors sometimes encounter problems like broken or damaged springs. Let’s take a look at a few tested methods for replacing the roll up door’s spring.
Buy A Spring that's the Same Dimensions As The Ones On The Door
If your garage opener’s springs are damaged and need replacement, you will need to purchase a spring that has the same thickness, length and diameter as the one you just removed. A spring of the incorrect length and size could easily loosen up, and weaken the door’s hold. Also make sure you buy an extra spring for future contingencies.
How To Install The New Spring
To do a roll up garage door replacement of the spring, fully open the door first, and put a clamp or a large object under it to prevent the equipment from crashing down on you. Next, move the spring through the sheaves or corners, and carefully attach the spring following the manufacturer’s recommendations. The opener’s spring is supposed to stretch as the door is lowered, and once it’s down, it should return to its original position.
How to Do Safety Checks
To guarantee safety, garage door repair Roseville experts suggest that you regularly check if the spring is securely attached at both ends, and the opener’s cable is also secured. Also try raising the door a couple of times, as well as put the clamps back in place. Also find out if the door’s sheaves do not touch the fixed sheave at the end. If the roll up door is still too heavy to lift, just carefully readjust the spring, as it may have been installed too tight.